The Uses of Suction Hoses for Petroleum

Whenever your industry needs to move petroleum, gasoline, tar, oil, or vapor emission from one area of a facility to another, it is necessary to use a different set of hoses for each particular liquid or gas.  An individual line of emission hoses will be able to handle intake and outtake of fuel, proving a valuable addition for any business that deals with large amounts of energy or processed materials.  What types of hoses can be used, and what matter are they best suited for moving?

Discharge Hoses

Of all the types of petroleum suction hoses on the market, the discharge hose is by far the most versatile and practical.  Whenever you need to move large quantities of oil from a truck, a barge, a dock, or even an entire freighter, a soft wall hose will be the company’s most valuable tool.  With one hundred and fifty pounds per square inch of pressure, a so-called soft hose is still incredibly versatile and can cover any temperature extreme — from minus twenty-two degrees Fahrenheit to one hundred and seventy-six degrees.  With coil packaging and lengths of one hundred feet, it is possible for a team to set up and take apart these hoses easily and effectively.

Fuel Transfer

When it is necessary to move one type of fuel to another area, a transfer and suction discharge hose will have some of the highest tensile strength without much weight.  These hoses are superb for any matter of refined fuels, most notably commercial diesel and gasoline.  They must be drained after any use in order to prevent cross-fuel contamination, but the high working pressure and small bend radius mean that they can be applied in any situation, even one where there is a minimum of space to maneuver.  These hoses are some of the most temperature durable, able to withstand a two-hundred and twenty degree swing between extremely hot and extremely cold.  At three hundred pounds per square inch, it can handle even the strongest pressure pumps.

Oil Field Vacuums

In the event that a company or facility has to move more than just fuel out on the drilling site, a vacuum is a more powerful type of hose meant to be able to suck out not only the crude oil from tar sands and deposits but also the debris that comes along with it.  These polyester tire cord vacuums are able to suck up everything along their path, including (but not limited to) the fresh and salt water around an oil deposit, the mud and silt kicked up by the drilling operations, and the hydrochloric acids needed to clean out equipment and fuel lines.  Though they are not to be used for processed fuels like gasoline, they are able to handle any other type of material, whether it is petroleum based or otherwise.  At less than one pound per foot, they have a low density along with a strong vacuuming power so that they can scoop up messes without getting in the way or holding you down.